Skip to article
BinCompass

BinCompass blog

How to keep track of what is in a storage unit

Record what is in a storage unit before you stack it. Use bin names, location photos, notes, and QR labels, and see what the unit page actually shows.

A storage unit punishes a bad memory. The trip takes time, the aisle may be narrow, and the thing you want is usually behind two other totes. The useful record is the one you can check before you leave the house: which container, what is inside it, and where that container sits.

You can do this with ordinary bins. You do not need a facility account, and you do not need a map of the whole unit. Photograph the spot, write a note a stranger could follow, and label the side that faces the aisle.

Inventory the container before you stack it

Name the bin for its contents, not for the day you packed it. “Winter coats” and “Camping gear” beat “Unit box 4.” Add the item names you will search for: the tent, the sleeping bags, the coat you wear to shovel snow. Leave out the handful of odds and ends unless you know you will look for them by name.

Do this while the bin is still at home, or at least while it is on the floor of the unit with the lid off. Once it is on the top of a stack against the back wall, you will not open it to write a better list. A photo of the open bin is worth taking then. If you use suggestions from that photo, review them before saving. The photo does not keep itself up to date.

Photograph where the bin sits

Take a photo of the shelf, the wall, or the corner, then mark the bin on that photo. In BinCompass the mark is a box you can move and resize on the picture. Add a note in plain language: “back wall, second shelf, left of the blue tote.” You can also add an optional floor marker that says where you were standing and which way to face when you come back. Bins can share one photo of the same aisle.

The location photo is separate from photos of what is inside the bin. Twelve gallery photos per bin is the cap on Free and Pro. A short note still matters, because a photo of a dim unit is hard to read on a phone in the parking lot. Write the note as if you were texting it to someone who has never been there.

Label the side you will see later

Face labels toward the aisle. A correct list on the back of a tote is the same as no list once the tote is pushed in. Keep the name large enough to read without pulling the bin down. A QR label can sit next to that name. Scanning it opens the record for a signed-in household member. It does not unlock the unit, and it does not show the inventory to anyone who photographs the code.

Print on paper and tape it on if you are in a hurry. Avery 64510 and the Brother QL layout are there when you want stickers that match those supplies. Print at 100% scale. If the unit is humid or the bins are handled often, a paper label under clear tape lasts longer than ink alone. Update the digital list when you take something home. Leave the label on the bin.

Check the list before you drive over

Search for the item at home. The result should name the bin and, if you saved one, the location note and photo. If the search is empty, the item was never recorded, or it was recorded under a name you would not type. “Camping stove” and “propane burner” are both fine if you will remember which one you used.

When you bring something back, change the record the same day. Move it to a home bin, such as a hall closet, or remove it if you are done tracking it. A storage inventory that still lists the tent after the tent is in the garage will send you on a wasted trip next spring. The app will not notice the change for you.

  • Search at home, before you pay for the drive.
  • Read the location note, then the photo.
  • Take only what you came for, and update the bin.
  • Leave aisle-facing labels in place.

What the storage unit page shows

The page at /unit is for an active Storage plan. It shows unit details, an overview photo, staff requests, and household seats. It does not show a shelf map. Facility name and unit number come from a participating facility, and you do not type over those. You can still keep size, access notes, and a renewal date with the unit details.

Staff requests are for bins or items, and you choose whether a location photo is included. You follow the request’s status in the app. Retrieval requests can include a quote you approve and pay before staff start. None of that is required to keep your own inventory. On Free you can record up to 10 bins with photos and labels. Pro removes the bin cap for $5.99 a month. New checkout does not sell a public “Pro + Storage” plan on the pricing page. If you already have a Storage plan, that household can include up to 15 people, counting the owner. Free and Pro households stop at 5, also counting the owner.

Share the list with the people who use the unit

If a partner or a parent also goes to the unit, they need the same list. Invite them as an editor if they should change bins, or as a viewer if they only need to search. Viewers can look. They are not the right role for the person who is supposed to update a bin after a visit.

Borrowing works here too, when someone takes a camp stove home for a weekend. Record who has it, the quantity, and a due date if you want one. The app stores that checkout because a person entered it. It does not sense that the stove left the unit. The borrower can put the due date on their calendar from Items I have, and they record the return to a bin.

For a shorter checklist, read the Storage unit organization guide.

Start with the bins you already have.

Create a free account

Free includes 10 bins. No credit card. Campaign tags on this page are added to the signup link.