BinCompass blog
How to inventory moving boxes before the truck arrives
Inventory moving boxes by room, record the items you will search for, and label each carton before it is stacked. Start free, or use the 90-day Moving Pass when you need more than 10 bins.
A room name on the side of a carton is enough to get the box into the right room. It is a poor way to find the kettle on the second night, or the phone charger before the furniture is built. An inventory is a short list of the names you will actually search for, written down while the box is still open.
You can keep that list on paper. A shared list is more useful when more than one person is packing, and when the boxes will sit in a garage or a storage unit for a while. The steps below work with a notebook. Where an app helps, the notes say what BinCompass can record and what it cannot.
Name the box for the room it is going to
Start about a month out if you can, and earlier if you are packing a whole house. Give each box a name you would say out loud: Kitchen 01, Bedroom linens, Hall closet. Put the destination room on the carton in marker as well. The written room name still works when the phone is in another room or the battery is dead.
Number the boxes in the order you pack them, not in the order you hope to unpack them. Kitchen 01 and Kitchen 02 are easier to tell apart than two boxes that both say Kitchen. Keep a separate essentials box for the first night: medications, chargers, a few mugs, basic tools, toilet paper, and a change of clothes. That box should travel with you, not on the bottom of a stack.
Write down what you will actually search for
Open the box, put things in, and list the names you will type later. “Kitchen stuff” is not a useful search. “Electric kettle,” “coffee maker,” and “phone charger” are. You do not need every spoon. Record the items that would annoy you if you had to open five cartons to find them.
If you are using BinCompass, each box can be a bin. Set the destination room, then add items by typing, by speaking a list and reviewing the names, or by photographing the open box and reviewing the suggestions. Photo and speech tools can be wrong. You confirm every line before it is saved. A receipt photo is a different job: it can suggest things you just bought, such as tape or boxes, and it uses one household AI credit per photo. It does not look inside a sealed carton.
Quantities help when you have more than one of something, such as two sets of sheets or a box of mugs. Item photos are optional. A single photo of the open box is usually enough. The bin gallery holds up to 12 photos on both Free and Pro. Photos of individual items are stored separately from that gallery.
Label the box before it is stacked
Put the label on a side you will still see after the box is in a pile. A label on the lid disappears as soon as another carton goes on top. Keep the room name readable next to any code. If you print a QR label, the code is only a shortcut to the list. Someone still has to sign in with access to that household before the contents open. The label does not make the inventory public.
You can print at home on ordinary paper, on Avery 64510 sheets, or with the Brother QL layout for 62 mm continuous labels. Print at 100% scale and turn off “fit to page.” Ready-made sticker packs are a separate purchase. You do not need them to start. If you already have blank labels, a marker and the box name are enough for moving day, and you can add a QR label later.
Keep the list useful while you pack
Update the list when you change your mind. If the lamp moves from Bedroom 02 to the essentials box, the search should say so. A stale list is worse than a short one, because you will trust it and then open the wrong carton.
Household sharing helps when two people are packing different rooms. On Free and Pro, a household can include up to 5 people, and the owner counts. Editors can change bins. Viewers can look and search. Everyone uses the owner’s plan and the same monthly pool of AI credits. Pending invites count toward the 5.
Packing lists are a second tool, separate from the bin itself. A packing list can hold up to 200 lines, with a quantity and a packed checkbox, and it can point at an item already in your inventory. Owners and editors can update the list. Viewers can read it. Use it for “what still has to go in a box,” and use the bin for “what is inside this carton.”
- Essentials box stays with you, not under the stack.
- Search names, not vague categories.
- Room name in marker, plus a label on a visible side.
- Change the list when an item changes boxes.
After the move, unpack from the list
Search for the thing you need, open that box, and update the record as the item comes out. If you leave “kettle” on Kitchen 01 after the kettle is on the counter, the next search sends you back to an empty carton. Move the item to a new bin, such as a kitchen cupboard, or remove it when you are done tracking it.
The app does not know that a box was unpacked. It also does not know who carried it. If you lend a tool during the move, record the checkout: who has it, how many, and an optional due date. The borrower can add that date to a calendar from Items I have, and the borrower records the return. Nothing in the app detects that an item left the box.
When ten boxes is not enough
The Free plan includes 10 bins, 12 photos per bin, and 20 household AI credits each calendar month (UTC). No credit card is required. That is enough for a small apartment or for the rooms you care about most. If you are numbering every carton in a larger move, you will pass 10 bins.
Monthly Pro is $5.99, renews until you cancel, and includes unlimited bins and 200 household AI credits a month. The Moving Pass is $16.99 once for 90 days of those same Pro limits, and it ends on its own with no renewal. Applicable tax is added at checkout. Those are the amounts new checkout charges. Stickers, tape, and boxes are separate. You can compare the plans on the pricing page and start on Free before you pay for anything.
For a shorter checklist, read the Moving & packing guide.