Skip to article
BinCompass

BinCompass blog

How to label storage bins so the list can change

Label storage bins with a readable name and an optional QR code. Print on paper, Avery 64510, or Brother QL, and see how ready-made packs use Spartan S002A sheets.

A label has two jobs. The first is to tell a person in the room what the container is, without a phone. The second is to open a list that can change after the lid is on. A handwritten name does the first job. A QR code can do the second, if it points at a record you can edit.

Skip the code until the bin has a name and a few contents. A label for an empty record only tells you that the container exists. The steps below cover what to write, how to print, and what a scan does and does not reveal.

Create the bin before you print anything

Name the container the way you would search for it: Holiday lights, Painting supplies, Board games. Choose a room. Add the items you will look up later, not a transcript of every object. A photo of the open bin is a good start. You can add a photo of one item when that helps you recognize it. Item photos do not use the same slot as the bin gallery, which holds up to 12 photos per bin on Free and Pro.

You can type the list, speak it and review the names, or photograph the contents and review suggestions. Suggestions are drafts. Nothing is saved until you accept it. Manual edits do not use an AI credit. If you use a photo or a speech cleanup that calls the model, that request uses one household credit, and a failed request does not.

Keep a readable name next to the code

Print or write the bin name where a person can read it from a step away. The QR code is a shortcut for someone who is signed in. Cleanup time usually happens without unlocking a phone. Children, guests, and you yourself, with wet hands, will use the words.

Put the label on a face that stays visible. Front of the bin, not the lid, if other containers will be stacked on it. In a storage unit, use the aisle side. If the bin is clear, a label still helps, because a clear bin full of cables does not tell you which cable you wanted.

Match the print layout to the paper you have

BinCompass has three home-print layouts. Regular is a large label for ordinary Letter or A4 paper and any printer. Avery 64510 is the 2 by 2 inch layout, 12 labels on a Letter sheet, and it lines up with that specific Avery sheet. Other Avery products can have different spacing, so they should not be forced through the 64510 template. Brother QL is one 62 by 62 mm label per page for a QL-820NWB with 62 mm continuous tape such as DK-2205.

In the print dialog, choose actual size or 100% scale, and turn off “fit to page” and “shrink to fit.” Print one page on plain paper and hold it against a label sheet before you use the expensive stock. For Brother, pick the QL-820NWB, 62 mm continuous paper, and 100% scale. The web app cannot talk to Brother’s own software. It relies on the system print dialog and the driver.

  • Regular: Letter or A4, any home printer.
  • Avery 64510: 2 × 2 inch labels, 12 per Letter sheet.
  • Brother QL: 62 mm continuous, one square label per page.
  • Always print a paper test at 100% scale first.

Ready-made stickers use a different sheet

You can also order sticker packs from the BinCompass store when ordering is open. Packs are 24, 48, or 96 stickers, priced at $12, $19.99, and $29.99 before tax. US shipping is included in those pack prices. Tax is added at checkout. Ordering can be paused, and a size can sell out. The store shows what is available.

Those orders are printed on Spartan S002A sheets: 12 square labels on a Letter page. The print setup is 100% scale, Letter, with headers and footers off. S002A is the supplier sheet for that order. It is not the Avery 64510 die-cut layout, and it is not Brother continuous tape. If you are printing at home, choose Regular, Avery 64510, or Brother QL. If you bought a pack, you receive finished labels. You do not load S002A sheets into your own printer unless you are producing an order.

Scanning opens a private record

A BinCompass QR code can be opened from the phone’s camera. You still sign in, and you only see the bin if your account has access to that household. A person who finds a labeled bin in a garage does not get a public web page of your inventory.

You can link a QR sticker you already own when each sticker has its own code. An owner or editor links it to a bin inside the app. A viewer is asked to have an editor do that. Scanning a non-BinCompass code with the phone’s camera still opens whatever destination was printed on that sticker. To open your bin, scan it inside BinCompass after it is linked.

Change the list, not the sticker

When the contents change, edit the bin. The same label keeps opening that record. Reprint only if the sticker is damaged, the name on the paper is wrong, or you want a fresh copy. This is the main reason to bother with a code at all: the paper stays put, and the list is allowed to change.

Free includes 10 bins, which is enough to label the containers you actually lose things in. Pro is $5.99 a month for unlimited bins, and it renews until you cancel. The Moving Pass is $16.99 once for 90 days of Pro and then ends without renewal. Tax is extra. Labels and printers are supplies, not part of the plan. A household on Free or Pro can share the labeled bins with up to 5 people, including the owner.

Optional supplies

Paper labels are enough. If you want the sheets or printer the in-app layouts were drawn for, these are the same products linked from the BinCompass home page.

As an Amazon Associate, BinCompass earns from qualifying purchases.

For a shorter checklist, read the Printable QR bin labels guide.

Start with the bins you already have.

Create a free account

Free includes 10 bins. No credit card. Campaign tags on this page are added to the signup link.